Wavin Plastic

Wavin Plastic - Underfloor Heating, Flood Management and Plastic Drainage Systems


Wavin Plastics Limited is the UK's leading supplier of plastic pipes and fittings for water management and drainage to the building, construction and utilities markets.

Over 17,500 products are designed and produced under the Osma brand with 550 patents for a wide range of applications including above and below ground drainage, plumbing and heating, water management, and drinking water distribution.

Wavin Plastics is a division of the Wavin UK Group with a head office at Chippenham in Wiltshire.

UK manufacturing sites serving this division are at Chippenham and Brandon in Co. Durham (both for plastic pipe products), Hazelhead (for channel drainage systems) and Exeter (for underfloor heating systems).

Wavin Plastics is committed to developing innovative Osma products and systems to deliver complete solutions to the building industry. In the areas of rain and storm water and clean and foul water, Wavin understands the market requirements and responds to market needs by focusing on water and energy management.

FLOOD MANAGEMENT

In times of very heavy rainfall, the concentrated volume and velocity of surface water place excessive pressure on existing watercourses and local drainage infrastructure. There is an increased risk of flooding, both locally within developed areas, and also downstream.

The majority of rain falling on natural, undeveloped land soaks into the ground and slowly infiltrates through to streams, rivers and groundwater. Whereas developed sites tend to provide impermeable surfaces, allowing the water to quickly run off into drains and then into nearby streams and rivers increasing the risk of flooding significantly.

Wavin continues to develop innovative solutions to reduce and eliminate these risks. In line with government legislation regarding Sustainable Drainage Systems (SUDS), this can be achieved in two ways - temporary storage or infiltration.

ATTENUATION AND WATER STORAGE

Attenuation is the provision of temporary water storage of excess flows so that immediate outflow into streams and rivers is limited. This can be achieved by building an underground structure using the Osma AquaCell system wrapped in an impermeable geomembrane.

INFILTRATION AND SOAKAWAY

Using efficient soakaways to infiltrate storm water into the ground can be achieved by building an underground structure using the Osma AquaCell system wrapped in geotextile.

UNDERFLOOR HEATING

OSMA underfloor heating technology has been developed to suit all building construction types typically used in the UK – both concrete-based floors and timber floors. It provides innovative, cost-efficient solutions for all types of environment, including residential, commercial and public buildings.

Compared with other forms of heating, advantages include:

  • All-round comfortable warmth
  • Unhindered room layout
  • Improved energy efficiency
  • Healthier environment
  • Greater safety

PLASTIC DRAINAGE SYSTEMS AND BARRIER PIPE

The Osma product ranges offer established and innovative plastic drainage systems to provide comprehensive, integrated solutions to the civil and infrastructure market sector, including structured, walled UltraRib and Twinwall large diameter systems, solid walled OsmaDrain, channel and land drainage and pressure pipes such as Trigon for water supply. This is an innovative, multi-layered polyethylene and aluminium barrier pipe system for the safe transportation of potable water through contaminated land. Solutions for the building and installation market sectors include rainwater, soil and waste and flexible plumbing.

SERVICE

Wavin Plastics has been consistently preaching Egan Agenda principles and applying them in practice: working for sustainability on all fronts; applying single-minded customer focus; driving innovation; expanding training; encouraging best practice and delivering better value and greater confidence to customers.

Furthermore, customer needs are fulfilled by delivering easy to use, cost effective products which work together, backed up by expert advice for design and installation.

Info Icon Contact Details
Wavin Plastics Limited
Parsonage Way
Chippenham
Wiltshire
SN15 5PN
United Kingdom
Tel: +44 1249 766 600 (General)
Tel: +44 1249 766 655 (Technical)
Fax: +44 1249 443 286
Email: info@wavin.co.uk
Email: technical.design@wavin.co.uk
URL: www.wavin.co.uk
URL: www.osmaufh.co.uk
URL: www.wavinimages.co.uk
URL: www.wavinpdfs.co.uk

Send an Enquiry to this Company


The details you provide will not be used to send unsolicited emails.
For further information please read our Privacy Policy.



Home
New On This Site
Products & Services
Company A-Z
Projects
Features
Inside Architecture
Speakers' Corner
White Papers
Jobs & Careers
Gallery
News & Updates
Events Listings
Newsletter Archive
Newsletter Sign-Up
Advertise
About Our Services
Client Area


RSS What is RSS
For everyone in building design and construction