The managing director of Wrightstyle, a glass solutions company that worked on Orbital at London's...
Wrightstyle is a specialist steel and aluminium glazing company and supplies its fire-rated systems internationally. Marketing director Jane Embury looks at fire safety in schools.
Schools are where we entrust the next generation, our children, and mostly, it’s a trust that is reciprocated in good facilities and teaching staff, as well as effective emergency procedures to deal with any eventuality.Generally, that means protecting buildings against the threat of fire and having a rehearsed evacuation strategy to bring everyone to safety in the event of a fire.
It is a requirement that all schools have to adhere to as the threat of fire, despite being a diminishing risk, isn’t as remote as we would like. Sometimes, worse, it’s deliberate. There are hundreds of arson attacks on schools each year and a third of these happen during the school day, often perpetrated by either a school student or ex-pupil.
Despite the falling number of incidents, school fires cost the UK approximately £65m. Worryingly, one in eight schools annually suffers a serious arson attack. Of all fires in schools, roughly 32% are attributed to arson.
Some recent examples include:
- September 2013: Five boys, some as young as 11, suspected of causing a fire at Leyland St Mary’s Catholic Technology College, Lancashire.
- March 2014: Arsonists blamed for a school fire in Gwynedd, Bangor which damaged a classroom.
- March 2014: A 16-year-old girl arrested on suspicion of arson following a fire at the Millais School, Horsham.
- April 2014: Four teenagers arrested on suspicion of arson at an Islamic school in south-east London.
However, most fires start by accident. The West Midlands fire service says that the most likely rooms for accidental fires in schools to start is the kitchen or a classroom and that the most common source of ignition is faulty fluorescent tube light fittings (20%).
It goes on to suggest that the second most common cause of ignition is fixed mains wiring, the most common day for accidental fires is a Friday (27%) and that 43% of accidental fires occur between 10am and 2pm.
Therefore, most school fires start accidentally, sometimes bizarrely. For example, a school in Poole, Dorset was badly damaged by fire in December 2012 after being struck by lightning.
However when a fire starts, the first concern is for those within the school, which has prompted the UK Government to publish an updated guide for schools, which deals with the provision and management of fire safety.
Like everywhere else, schools are required to undertake risk assessments to identify the general fire precautions needed to safeguard the safety of occupants in case of fire, including their safe means of escape. The risk assessment guides the fire evacuation plan, recognising the particular vulnerability of children and covers everything from escape routes, signage, assembly points, internal and external doors, as well as a roll call for all staff and children.
For instance, occupants in a building should generally be able to escape away from the fire. That means having escape routes protected by fire-resistant materials or self-closing fire doors. It also means recognising that fire travels upwards, so that stairways must be protected.
It also means having doors that open outwards to make escape easier and, if there are large numbers of people, minimising the crush risk. Exterior fire doors should also be checked to ensure that obstructions aren’t cluttering them up, such as bulk deliveries.
At Wrightstyle, our business is about managing the risk of fire. Our systems stop fire, smoke and toxic gases from spreading for up to 120 minutes, and thereby minimising fire damage and allowing occupants to escape. Over the past few years, we have worked on a range of educational projects in the UK and as far afield as Malta and Hong Kong, underlining how specialist and international is the advanced glazing market.
Our compatible steel or aluminium systems, with the glass and framing systems tested together, are accredited to EU, US and Asia Pacific standards and our advice is to always specify the glass and frame as one unit; in a real fire situation, the glass will only be as protective as its frame and vice versa.
The glass and glazing industries have come a long way in the past few years, developing protective systems to better contain fire and therefore assist safe evacuation.
For more information, please contact Wrightstyle.
Wrightstyle has finished a major renovation project for Network Rail Wales at Cardiff Central Station.The...
Wrightstyle is one of Europe's leading suppliers of advanced steel and aluminium glazing systems, supplying...
Wrightstyle has been certified to ISO 9001 with the British Standards Institute (BSI).BSI has been...